NANOPROTECH Electric 150 ml
With NANOPROTECH Electric, you can protect your electrical devices from water and revive dampened electronics.
Using a unique spray, you apply a thin film of nanoparticles onto electrical contacts, creating an impermeable barrier that prevents water ingress for up to 12 months. By applying the solution, you eliminate moisture, remove initial oxidation, and restore functionality to aging electronics. It also protects against short circuits and arcing. Ideal for high-voltage devices.
Volume size:
| Category: | Technical spray |
|---|---|
| Weight: | 0.3 kg |
NANOPROTECH Electric Professional
Spray NANOPROTECH Electric protects electrical appliances and machinery from the effects of acid rain, aggressive chemical solutions, and high humidity for up to 1 year. By applying the spray with nanoparticles, you will preserve the electronics, extend their lifespan, and significantly reduce repair costs.
What is Nanoprotech Electric used for?
It will protect against short circuits. After application, the nanoparticles will adhere to the metal joints and prevent water molecules from accessing them, thus preventing short circuits. It will also prevent device discharge, for example, when working in a humid environment.
It cleans oxidation and restores functionality. By removing oxidation from the surface of contacts, the nanoparticles will revive aging electronics and extend their lifespan.
It will save wet devices. After applying the spray, the nanoparticles will displace water molecules from the device, preventing its oxidation and damage. The device will function as before and, additionally, remain protected against corrosion.
How does Nanoprotech Electric work?
The basis of our products is water-repellent nanoparticles. Thanks to the oil-based carrier medium, the particles penetrate through oxidation, spread over the metal surface of the device, and adhere to it. They displace moisture and create a barrier that prevents further water molecules from passing through.
Product video of Nanoprotech Electric:
The nanoparticles in the spray will protect:
- Outdoor and indoor sockets and lighting,
- Security systems, sensors, and detectors,
- Garden, workshop, and construction equipment,
- Low and high-voltage wiring,
- Alternators, generators, and distribution and fuse boxes,
- Batteries and their contacts,
- Connectors and contacts of all kinds.
How to use the spray:
Use NANOPROTECH Electric only with protective gloves and in well-ventilated areas. Shake the spray thoroughly before use.
- Apply the solution to the internal components of devices that are unplugged from the power source; spray onto the designated surface in a continuous layer from a distance of 15 to 20 cm, or directly onto the specified area.
- After application, wait for 15 minutes, then you can wipe off any excess solution.
- For complete activation of protection, we recommend waiting 24 hours before using the treated device normally. If you are unsure about applying the solution, call us at +420 778 494 495, and we will be happy to advise you.
Warning: NANOPROTECH Electric spray is intended to protect electrical contacts from moisture and oxidation. Videos with submerged light bulbs demonstrate the maximum insulation capability of the product. These tests were conducted under expert supervision - under no circumstances should you attempt to replicate them!
Technical characteristics:
Maintains insulation properties for up to 1 year, withstands temperatures from -80°C to +160°C, consumption: approximately 50 ml per 1 m2, packaging content: 150 ml.
Composition:
Mixture of mineral oils, propane-butane, deodorized paraffin, mixture of cyclic hydrocarbons, anti-corrosion additives, antioxidants, Nanoprotech additive.
Be the first who will post an article to this item!