Waterproof spray for Outdoor Wear 200 ml
Waterproofer for outdoor clothing by INPRODUCTS prevents soaking and staining of your membrane, softshell, and classic jackets and pants, hats, or gloves. The product is easily applied using a smart spray. After application, an invisible silicon layer protects your clothing from water and dirt and prevents damage from road salt. The clothing waterproofer is completely odorless, lasting up to ten wash cycles or three months. Verified by real adventurers.
Volume size:
| Category: | 200 ml |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.3 kg |
INPRODUCTS - Waterproofer for outdoor wear 200 ml
The INPRODUCTS spray creates a thin film of silicon nanoparticles that protects membrane clothing from brands like Gore-Tex, Climatic, Gelanots, and others against moisture and pollution. In case of extreme water pressure (such as wading or crawling), it helps accelerate the drying of the material up to 5 times faster.
What is INPRODUCTS - Waterproofer for outdoor wear - used for?
It prevents dirt buildup - The solution creates a protective silicon layer on the surface of the footwear, which repels water and dirt, and prevents damage to the material from salt. The waterproofer also prevents the formation of unsightly stains.
Colorless and odorless - While conventional waterproofing products contain various chemical substances, INPRODUCTS formulations are water-based. As a result, the spray is colorless and odorless, non-toxic to health, and can be safely used even in enclosed spaces without any concerns.
Preserves material breathability - INPRODUCTS waterproofer restores the breathability and properties of membrane textiles such as Gore-Tex and others. Your clothing will be protected against moisture while maintaining breathability.
Withstands up to 10 washing cycles - The silicon layer of nanoparticles allows the fabric of the footwear to be effectively cleaned from salt and sweat during washing. After drying, the functionality of the nanoparticles is restored. The impregnation can withstand up to 10 washing cycles with water and up to 5 cycles with detergent.
How does the Waterproofer INPRODUCTS work?
.png)
Watch the video to see how the impregnation works:
With impregnation, you can protect:
- membrane jackets, coats, and windbreakers,
- pants and shorts,
- hats and scarves,
- gloves.
How to use the spray:
Apply INPRODUCTS to clean, dry Outdoor Wear. Shake the spray well before use.
- Apply the solution in an even layer from a distance of 10 to 20 cm. When applying to non-absorbent material, spread the solution on the Outdoor Wear with a sponge.
- After application, wait 24 hours – during this time, a protective silicon layer will form on the surface. During drying, place the treated item in a ventilated area and out of direct sunlight.
Store the container with the solution at temperatures between 3 and 30 °C.
Technical properties:
Protection against water, dirt, and salt lasts up to 3 months (depending on the intensity of footwear use) or up to 10 washing cycles, consumption: 25 to 100 ml per 1 m² – depending on the absorbent properties of the material, shelf life: at least 2 years from the date of manufacture, package contents: 200 ml, 400 ml, 1 l, and 5 l.
Composition:
Dispersive product of modified silicon nanoparticles in an aqueous solution. INPRODUCTS products are safe for health and aquatic environments.
Be the first who will post an article to this item!